FIG. 1 — GENERAL VIEW
DN65 – DN600 · PN25 · DIMS IN MM
Full Bore Stainless Welded Ball Valve, Gear Operated
Full-bore stainless welded ball valve from DN65 to DN600, gear operated. Forged ASTM A182 F316 body with a full-port ball and an ISO 5211 gearbox — the combination used on stainless trunk lines and manifolds where the valve is too large to turn by lever and the medium will not tolerate carbon steel.
- SIZE
- DN65 – DN600
- PRESSURE
- PN25
- BODY
- ASTM A182 F316
- TEMPERATURE
- −45…+200 °C
Full port, no restriction
The ball bore matches the pipe bore, so you can pass a pig and lose no pressure head.
No actuator needed
A reduction gearbox keeps a DN600 stainless valve within handwheel effort.
Tested and traceable
Shell and seat pressure-tested to EN 12266-1, and traceable by heat number.
Specifications & standards
Values below are for the standard configuration. Other pressure ratings, trims and end connections are available on request.
NOT FOR STEAM SERVICE — PTFE seat, suitable to +200 °C. For steam or higher temperatures ask for the metal-seated version.
Dimensions & weight
Taken from the verified EN / DIN tables for this body. Sizes in this series: DN65 – DN600.
| DN | PN | L (MM) | H (MM) | WEIGHT (KG) |
|---|---|---|---|---|
| DN65 | 25 | 300 | 224 | 12 |
| DN80 | 25 | 320 | 244 | 15 |
| DN100 | 25 | 320 | 289 | 29 |
| DN125 | 25 | 350 | 365 | 30 |
| DN150 | 25 | 400 | 422 | 55 |
| DN200 | 25 | 400 | 520 | 94 |
| DN250 | 25 | 580 | 555 | 180 |
| DN300 | 25 | 680 | 637 | 245 |
| DN350 | 25 | 760 | 680 | 430 |
| DN400 | 25 | 914 | 750 | 670 |
| DN500 | 25 | 1080 | 820 | 1100 |
DN600 in full bore is made to order — L, H and weight are issued with the quotation.
Related series
Other series from the same factory, built to the same welded, gasket-free principle.
PN40 (PN25 from DN65)
PN25
PN25
PN25