FIG. 1 — GENERAL VIEW
DN15 – DN150 · PN25 · BALANCING
Welded Static Balancing Valve
The welded static balancing valve: a fully welded ball valve with a V-port trim and two test ports, used to set and hold flow in district heating and cooling branches. DN15 to DN150 at PN25, lever operated up to DN150 — above that the valve is supplied with a gearbox. Like the rest of the range, there is no flange and no gasket inside the pressure boundary.
- SIZE
- DN15 – DN150
- PRESSURE
- PN25
- TRIM
- V-port
- TEST PORTS
- 2 ×
Set the flow, lock it
A V-port trim gives fine control at low opening, so a branch can be balanced to the design flow.
Measure without tapping the pipe
Two test ports let a differential meter be connected straight to the valve.
Lever up to DN150
DN150 is the largest size we supply lever operated; larger valves come with a gearbox.
Specifications & standards
Values below are for the standard configuration. Other pressure ratings, trims and end connections are available on request.
NOT FOR STEAM SERVICE — PTFE seat, suitable to +200 °C. For steam or higher temperatures ask for the metal-seated version.
Range & ordering options
This pattern is built to order, so the face-to-face length and the end detail are drawn for your line rather than taken from a stock table.
Dimensional drawings — L, H, weight and end detail — are issued with the quotation for the exact size and end standard you specify. The verified EN / DIN tables are on the technical data page.
Related series
Other series from the same factory, built to the same welded, gasket-free principle.
PN25
PN25
PN40
PN25