FIG. 1 — GENERAL VIEW DN15 – DN1400 · PN25 · DIMS IN MM

Product photograph and detail crops of this seriesDrawings per size with every quotation

DISTRICT HEATING · LEVER · CARBON STEEL

Fully Welded Ball Valve

MODEL BALL VALVE-DN100-PN25-WE

Lever operated floating-ball valve for district heating and cooling mains. Forged carbon steel body (ASTM A105 / P235GH) with a PTFE seat, welded ends and a stem sealed in both directions — DN15 to DN1400 at PN25. No flange and no gasket sits inside the pressure boundary, which is why these valves stay tight in chambered and directly buried sections of a heat network.

SIZE: DN15 – DN1400
PRESSURE: PN25
BODY: ASTM A105 / P235GH
TEMPERATURE: −45…+200 °C

WHY THIS SERIES

Nothing to leak from

The body is welded shut — no flange and no gasket inside the pressure boundary.

Built for heat networks

Seat and stem tested for the daily temperature cycling of district heating mains.

Tested and traceable

Shell and seat pressure-tested to EN 12266-1, and traceable by heat number.

Request a Quote Datasheet (PDF)

Compare with the other series

TECHNICAL DATA

Specifications & standards

Values below are for the standard configuration. Other pressure ratings, trims and end connections are available on request.

Design standard

ASME B16.34 · EN 12516-1

End-to-end

EN 12982 · ASME B16.10

End preparation

ASME B16.25 · B16.11 · EN 12627

Pressure test

EN 12266-1 · TSG D7002-2006

Body material

ASTM A105 · P235GH (1.0432)

Ball material

A105 / P235GH + ENP plating

Stem material

AISI 4140 (42CrMo4 / 1.7225) + ENP

Seat seal

PTFE + Viton O-ring

Temperature range

−45 … +200 °C

Operation

Lever up to DN150 · gearbox above · ISO 5211 pad

End connection

WE · welded ends (BW / SW)

Coating

Epoxy · 3PE for buried service

NOT FOR STEAM SERVICE — PTFE seat, suitable to +200 °C. For steam or higher temperatures ask for the metal-seated version.

SIZE TABLE

Dimensions & weight

Taken from the verified EN / DIN tables for this body. Sizes in this series: DN15 – DN1400.

DN	PN	L (MM)	H (MM)	WEIGHT (KG)
DN15	40	230	120	1.1
DN20	40	230	130	1.2
DN25	40	260	140	2.5
DN32	40	260	150	3
DN40	40	280	160	4
DN50	40	300	175	5.5
DN65	25	300	224	12
DN80	25	320	244	15
DN100	25	320	289	29
DN125	25	350	365	30
DN150	25	400	422	55
DN200	25	400	520	94
DN250	25	580	555	180
DN300	25	680	637	245
DN350	25	760	680	430
DN400	25	914	750	670
DN500	25	1080	820	1100

All dimensions in millimetres · weights in kilograms · DN15 – DN50 supplied PN40, DN65 – DN500 supplied PN25FIG. 1

DN600 – DN1400 is made to order in this series — L, H and weight are issued with the quotation.

ALSO IN THE RANGE

Related series

Other series from the same factory, built to the same welded, gasket-free principle.

All twelve series